Dymonic 100
Home > Products > Jointing Compounds > Dymonic® 100
HIGH-PERFORMANCE, HIGH-MOVEMENT, SINGLE COMPONENT, POLYURETHANE SEALANT
Dymonic® 100 is a durable, flexible sealant that offers excellent performance in moving joints and exhibits tenacious adhesion once fully cured.
Typical applications for Dymonic 100 include expansion and control joints, precast concrete panel joints, perimeter caulking (windows, doors, and panels), aluminum, masonry and vinyl siding. Dymonic 100 is also an excellent choice as a fluid applied flashing material in rough opening perimeters for fenestration/window, door and curtain wall applications.
Features & Benefits
- Can adhere to damp or green concrete and has a skin time of 2 hr with a tack-free time of 6 to 8 hr to significantly reduce dirt attraction.
- Movement capability of +100/-50% in typical field conditions, is low VOC, paintable, jet fuel-resistant, and will not crack, craze or yellow under extreme UV exposure.
- Suitable for water immersion and will not out gas.
- Formulated with an innovative polymer technology, similar to
TREMproof® 250GC and Vulkem® 45SSL, Dymonic 100 is highly versatile and has a unique capability to adhere to damp or green concrete and will not out gas.
-
Compatible and can be coated over with Tremco’s Vulkem Deck Coatings, ExoAir® Air Barrier products and the cold, fluid-applied TREMproof® line of below-grade waterproofing products.
-
Accepted/Compatible for use over Nudura Insulated Concrete Forms (ICF)
Applications
- Dymonic 100 is easy to apply with conventional caulking equipment. Ensure that the backer rod is fitted properly for friction and that any necessary primers have been applied.
- Fill the joint completely with a proper width-to-depth ratio, and then tool to ensure intimate contact of sealant with joint substrates.
- Dry tooling is always preferred, although compatible wetting agents can be used in limited amounts to slick the spatula if needed after an initial pass.
- For a cleaner finish, mask the sides of the joint with tape prior to filling.
Packaging
-
10.1-oz (300-mL) cartridges
-
20-oz (600-mL) sausages
DOWNLOADS
PRODUCT DATA SHEET
SAFETY DATA SHEET
Head Office: 8 Cresset Road, Midrand
Industrial Park, Chloorkop, Midrand, 1685
Tel: +27 (0) 11 254 5500
Email: stoncorsa@stoncor.co.za